HackingHow the stuff works?

Trick to change IP address in one minute

Change IP address in one minute

Howdy guys?  In this post of mine I am going to teach you how to change your IP address. As you all know Internet Protocol address(IP address) is a numerical label assigned to each device (e.g., computer, printer) participating in a computer network that uses the Internet Protocol for communication. Changing an IP address is no more a big deal nowadays. Anyone and everyone can do it. The method that I’ll show is quite easy and effective.



Before starting anything you need to know your present IP address. In order to get one follow the below steps-

  •  Open command prompt. Type “cmd” or “command” in the field. Press enter.
  • Type “ipconfig” and press enter. You now have your IP address in front of you. 

IP address










Now follow the below steps to change your IP address-

STEP 1- Click on “Start” in the bottom left hand corner of screen

STEP 2- Click on “Run”

STEP 3- Type in “command” and hit ok

You should now be at an MSDOS prompt screen.

STEP 4-Type “ipconfig /release” just like that, and hit “enter”

STEP 5- Type “exit” and leave the prompt

STEP 6- Right-click on “Network Places” or “My Network Places” on your desktop.

STEP 7- Click on “properties”

You should now be on a screen with something titled “Local Area Connection”, or something close to that, and, if you have a network hooked up, all of your other networks.

STEP 8- Right click on “Local Area Connection” and click “properties”

STEP 9- Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab

STEP 10-Click on “Use the following IP address” under the “General” tab

STEP 11- Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).

STEP 12- Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.

STEP 13- Hit the “Ok” button here

STEP 14- Hit the “Ok” button again

You should now be back to the “Local Area Connection” screen.

STEP 15- Right-click back on “Local Area Connection” and go to properties again.

STEP 16- Go back to the “TCP/IP” settings

STEP 17- This time, select “Obtain an IP address automatically” tongue.gif

STEP 18- Hit “Ok”

STEP 19- Hit “Ok” again

Thats it! This will do the trick for you. You now have a new IP address. If you practice this regularly you can get this process down to 15 seconds.

NOTE:- This trick only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.

the authorHarinder
blacklisthackers.com is created and owned by Harinder(Aarav).Aarav is a technology Blogger from India(Dehradun). He’s Quiet type and Creative Guy who enjoys creating and exploring new trends on the WEB. Currently pursuing B.tech from DIT University.


Leave a Reply